All parts available for Vire 7, 12 and 6 - please call for quote on New OEM, patten or used spares with expert advice, from one of Europe's tope enthusiast/experts B.Eng Maritime Technology - Nick LeFeuvre on 01202 470184 - please mention the "Vire website".

See Bottom of this page for online ordering for any Vire parts.

VIRE 7

 July 2006, 2 complete Vire 7 engines/subsystem available from £800, please call - similar to pictured below - to see details - goto the ebay shop

The unit above is Sold Early 2006, but I have 2 other engines, charging systems and lots of carbs (new and exchange) for sale

price guide:(Vire new rrp in brackets for comparison)

Vire 7 rebuilt with stainless mains £900 (£approx £1200 steel mains, not available anywhere)

gearbox £500 (£700 no longer available as new unit)

dynastart £200 (£340)

ALL ABOVE DEAL fitted together, tested running, crated for UK delivery£1200

carburettor £70 extra

I have an identical one, for £800, (cheaper only because it had some rust damage before being renovated). As before fully rebuilt with new bearings/seals and tested.



 

tel 01202 470184 to check availability/delivery for SALE

I have all sorts of spares for the Vire 6 (BVR) including an entire engine (offered rebuilt like this one I did a ear ago)

Above details: the concourse unit just completed16sept 2004(now sold)

Due to popular demand, I have decided to combine all my best bits and work long and hard, to produce a finished exchange unit.

This engine has needle roller bearing con rod, new top chrome ring on piston, all internal parts and bearings stripped and inspected, re-assemble with new gaskets,  polished & re-laquered if appropriate. gearbox completely overhauled witgh new seals, tighter water pump seal and drain hole freed to ensure no water ingress (otherwise common fault), gear selector arm completely dismantled and polished/greased/reasembled to prevent stiffness(common fault), and re-shimmed with new gaskets and oil. ignition/flywheel/front covers all polished and tested ok, cord pull casting polished to mirror finish, all brass pipes etc polished and laquered, water pump greaser upgraded to polished brass unit. The auxilliary bits are available should you need them(carb, exhaust), I can fit the engine for you, on an exchange basis.

call for a price for this one-off BVR, i promise you it's a lot less than replacement with a different engine or outboard given the different shafting, cabinetry, cooling, electrical work rung-up!

will split if you just want engine or gearbox.

Stop press July 2006 now in stock two Vire 6 for sale, 1 just overhauled below really nice..

,

1 rebuilt, also 1 kit - prices vary - see ebay shop

S TOP PRESS May 2005, the Silver / Gold Vire 6 BVR engine is sold,

July 2006- blue/silver just finished.and in the ebay shop

(May 2005, expecting Vire6 for repair from Scotland boatowner this week, hopefully simple faults and can be repaired and returned for small cost.)

May-July 2005 will be creating rebuilt/tested Vire6 and dynastart for stock.

I also have a couple of dynastarts which are spares/repairs, but one could be reconditioned/tested/sent out for far less than the £600 bosch replacement price!

regulators, carbs, morse-brackets, and a good gearbox

I would be willing to recondition anyones old unit for a reasonable fee. it takes about a day plus parts and delivery.(£200-400?)

if you have a smaller job - say replacing points - I may be able to help/advise

havent any perfect pistons, rings, con rod bushes and cylinders -are unavailable - but I think I know how much damage is important - considering the age and low value of most of the host boats - the important thing is curing the problems - not rebuilding as new without expense spared.

many common servicing spares carried in stock such as bearings/seals/rings/impellors/manuals - if i havent got it in stock, there is a good chance i can get it within 3 days. Minimum order and postage charges apply but i wont rip you off, you pay Vire RRP+fixed handling charge (£10 on orders less than £40)+post (dep on weight e.g. 60g manual is £0.60p,  or 1kg special order OEM imported 4 day service direct is just £15)

you can pay online with Paypal, Here's how to order....

1.phone/email your parts enquiry (Engine type (Vire 7/12/6), parts description, quantity, part number if you know it), including full name, address and telephone/contact details.

2.I will respond (usually within hours) with availability and an incl. price

3.you confirm your order

4.I email a paypal invoice

5.You pay paypal using your credit card online (or send money by arr.)

6. I receive confirmation and delivery address by paypal within seconds of your payment, and dispatch direct / indirectly same day.

7. You receive parts (usually within 3 working days), and confirm safe arrival to me as courtesy.

to read more - see Buy Parts Page